What We Install
Cat6 & Cat6A Copper
Plenum or riser-rated horizontal cabling — Cat6 for standard 1Gb work, Cat6A for 10Gb and high-PoE distribution. Belden, Berk-Tek, and Hubbell.
OM4 & OS2 Fibre
Multi-mode (OM4) for in-building backbones and single-mode (OS2) for inter-building runs across campuses, hotels, and waterfront properties.
Wall Plates & Modular Connectivity
Hubbell, Leviton, and Panduit wall plates and patch panels — properly labeled and tested.
Patch Panels & Cable Management
24, 48, and 96-port patch panels in clean, labeled racks with horizontal cable management — not the spaghetti most rooms inherit.
Open & Enclosed Racks
Middle Atlantic, Chatsworth, and APC racks sized to the install — open frames where appropriate, enclosed for shared spaces.
Testing & Documentation
Every drop tested with a Fluke DSX or equivalent, with passing reports delivered with the project package.
What's Included
Site Survey
Walkthrough with the architect, electrician, and IT contact — pull paths, plenum requirements, and rack location agreed before pulling a single cable.
Pull & Termination
Concealed pulls during construction or carefully routed in finished spaces — terminated to T568B with proper bend radius and slack at both ends.
Labeling
Every drop labeled per BICSI / TIA standards at both ends, matched to a printed and digital schedule.
Certification Testing
Fluke certification of every drop with results delivered to the client.
As-Built Documentation
Drop schedule, rack elevation, and floor plan delivered as PDF and editable file at handover.
Coordination With Trades
We work with the GC, electrician, and IT — we don't operate in a vacuum.
Designed For
New Commercial Construction
Offices, hospitality, retail, and light-industrial builds in Collingwood and Blue Mountains where cabling is specified at design and pulled during framing.
Office Tenant Fit-Outs
Office reno and tenant improvement projects requiring fresh cabling to current standard.
Hospitality & Multi-Building Sites
Hotels, inns, and resort properties requiring inter-building fibre and consistent in-room copper.
Why Summit Logic
BICSI-aligned design and labeling standards
Belden, Berk-Tek, Hubbell, Panduit, Leviton — name-brand only
Fluke certification on every project, results delivered, never skipped
Coordinate with GC, electrician, and IT — never in a vacuum
Engineered. Installed. Supported.
Our cabling practice tracks BICSI’s current Telecommunications Distribution Methods Manual, the design reference the industry certifies against.
Frequently Asked Questions
Related Services
Infrastructure built to last fifteen years.
Discuss a cabling project with Summit Logic — Collingwood, Blue Mountains, and Georgian Bay.