Our Installation Phases
Phase 1
Rough-In (during framing)
- Cabling pulled and labelled
- Conduit run for future-proofing
- Speaker, camera, and access point locations marked on framing
- Photo documentation of every cable path
- Coordination with electricians, HVAC, and plumbing
Phase 2
Trim Out (after drywall, before paint)
- Speakers installed in ceilings and walls
- Keypads, dimmers, and switches mounted
- Camera locations terminated and tested
- Audio Video plate boxes finished and labelled
- Pre-paint coordination so finishes are clean
Phase 3
Finishing (after final paint and flooring)
- Audio Video equipment racked and powered
- Televisions and displays mounted
- Final speaker and camera trim installed
- Programming uploaded and tested
- Calibration of audio, video, and shades
Phase 4
Commissioning
- ISF video calibration
- Dirac or Audyssey audio room correction
- Lighting scene programming and balancing
- Shade synchronisation and timer setup
- Homeowner training session
- Documentation handover
Phase 5
Support (ongoing)
- Software updates pushed remotely
- Annual checkup visit
- Service calls handled by the same team
Why Summit Logic
Bench-built racks tested in our shop before they arrive on site
Coordinated with your builder's schedule — weekly check-ins, not surprises
WSIB compliant, fully insured, full-time staff
Local team for service after closeout — same people, same numbers
Documented every step — cabling, programming, equipment, and warranties
What Gets Documented
Cable Schedule
Every run identified, labelled, and mapped — so future service or expansion is straightforward, not guesswork.
Pre-Drywall Photo Documentation
Photos of every cable path before drywall closes — invaluable when something needs to be located years later.
As-Built Equipment List
Every device, model number, and serial number recorded — full transparency on what's installed.
Programming Files Backed Up
Every line of programming archived and stored — so the system can be rebuilt or restored if hardware is replaced.
Network Diagrams & VLAN Assignments
Documented network architecture — segmentation, IP plans, and access control written down, not in someone's head.
Manuals & Warranty Registration
Equipment manuals organised and warranties registered on your behalf — coverage starts the day it should.
Frequently Asked Questions
Related Services
Home Automation Hub
The full automation overview, platform options, and service model.
Learn moreSystem Design
Documented design, accurate budget, and roadmap before installation begins.
Learn morePre-Construction Consulting
Engaged at the architectural stage — scope coordination and infrastructure planning.
Learn moreService & Maintenance
Ongoing support, monitoring, and updates after the system is live.
Learn moreStructured Wiring
The low-voltage backbone — Cat6/6A, fibre, and conduit pulled to every room and rack.
Learn moreReady to plan a clean installation?
Book a consultation and we'll align on phasing, scope, and builder coordination.