Why Pre-Wire Matters
You only get one chance to wire a home properly. Once drywall closes up, every change costs 10x more. Pre-wire is where smart homes are won or lost. We pull every cable you'll need at rough-in — and a few you might want — so the home is ready for whatever comes next. Most homes we touch later were either never pre-wired, or pre-wired wrong.
What We Pull
Cat6 / Cat6A Data
To every TV, access point, camera, and intelligent device — home-run to the equipment closet and certified at termination.
Fibre Backbone
Single-mode or multi-mode fibre between the processor closet and detached buildings — garages, guest houses, boathouses, pool houses.
Speaker Wire
14-gauge OFC indoors, 12-gauge direct-burial outdoors — to every audio zone the design calls for, indoor and outdoor.
Shade & Lighting Conduit
Lutron Sivoia QS wired runs and architectural lighting buses — pulled to manufacturer spec so the system commissions cleanly.
Standard Pre-Wire Includes
Cabling to every TV location — 2x Cat6 + coax + speaker wire
WiFi access point cabling — typically 4-12 locations per home
Camera cabling — Cat6 PoE to every planned camera location
Audio zone cabling — speaker wire to every indoor room and outdoor zone
Shade cabling — Lutron Sivoia QS wired runs to every motorized shade
Lighting control cabling — Lutron HomeWorks or Crestron control buses
Network rack location identified and conduit pulled for service access
Every cable labelled at both ends with the as-built schedule
Documentation Included
As-built cable schedule with every run identified by ID, type, and endpoint
Photo documentation of cable paths and penetrations before drywall closes
Floor plan markup with device locations, AP locations, and rack location
Handoff package delivered at closeout — for you, your builder, and any future trade
Designed For
New construction custom homes
Major renovations where walls are open
Cottages and outbuildings during the construction phase
Why Summit Logic
We start at the architectural drawing stage, not after framing is up
Cabling done by certified low-voltage technicians, not framers with a spool
Every cable labelled, photographed, and documented in an as-built package
Coordination with the electrician, builder, HVAC, and architect before walls close
Frequently Asked Questions
Related Services
Networking Hub
The full network design, WiFi, structured wiring, and remote management overview.
Learn moreWhole-Home WiFi
Ubiquiti UniFi access points engineered for full coverage across homes, cottages, and light commercial.
Learn moreHome Automation
Whole-home control of lighting, shading, audio, video, and security on one platform.
Learn moreAV Rack Build
Centralized AV equipment racks — properly cooled, organized, and serviceable.
Learn moreBuilding or renovating? Let's plan the wire.
Book a consultation. We'll work with your builder and architect before drywall closes.