Fence Lines and Perimeters
Detect someone crossing a boundary in the dark.
Thermal Security Cameras for Dark and Open Areas
Summit Logic designs and installs thermal security cameras for Collingwood businesses and properties across Southern Georgian Bay. Thermal works best where lighting is poor and the area is wide: lots, yards, fence lines and the back of a building.
Thermal spots people. It can't tell you who they are. Pair thermal with regular cameras when you need to see who it was.
Thermal cameras are part of our commercial security in Collingwood, alongside commercial security cameras and monitored alarms.
What Thermal Cameras Do Well
- Detect people and vehicles in total darkness
- Work through shadows and glare, and see through smoke and light fog
- Cover wide, open areas where lighting is poor
- Spot people without recording faces
- Check how hot gear is running, on models built for it
- Work alongside regular cameras that show who it was
Where Thermal Security Cameras Work
Parking Lots
Cover wide lots where lighting can't reach every corner.
Equipment and Storage Yards
Watch outdoor equipment after hours.
Back of the Building
Cover loading areas and rear doors with little light.
Rooftop Equipment
Watch gear that sits out of sight.
Electrical and Mechanical Rooms
Some models can warn you when gear runs hot.
Thermal vs Regular Cameras
Thermal doesn't replace regular cameras. It does a different job.
- Thermal is for detection. It shows that someone or something is there, day or night.
- Regular cameras show who it was. They show faces, clothing and licence plates when there's enough light.
- Thermal ignores light. Darkness, shadows and glare don't affect it.
- Use both where it matters. Thermal raises the alert, and a regular camera shows who it was.
How We Plan Thermal Coverage
We start with the area you need to protect and where someone could come from. Then we work out where thermal earns its place and where a regular camera does the job.
Every camera goes on the drawings before anything is ordered, alongside your other cameras and your network.
With a service plan, our remote monitoring catches offline cameras and failed devices.
Why Thermal Fits Georgian Bay Winters
Long nights are the local factor. On the shortest day of the year, Collingwood gets under nine hours of daylight. In early December, the sun sets around 4:40 p.m. For most of a winter evening, a regular camera depends on its own infrared light or nearby lighting.
A thermal camera doesn't need light at all. Thermal cameras detect heat, so they work in total darkness, shadows and glare. That makes thermal security cameras a strong fit for lots and yards that sit dark all winter.
If you add regular cameras alongside thermal, Canada's privacy guidelines for business cameras apply. Our camera page covers the privacy rules for business cameras.
Service Area
We install thermal security cameras in Collingwood, The Blue Mountains, Thornbury, Wasaga Beach, Meaford and Creemore. We're local to Georgian Bay, not driving in from Toronto.
Frequently Asked Questions
No. Thermal cameras detect heat, so they show that a person is there, not who it is. Pair them with regular cameras to see faces.
Yes. They detect heat, not light, so darkness, shadows and glare don't affect them.
Through smoke and light fog, yes. That's one reason they suit open, exposed areas.
Some can. Certain models can alert you when gear gets hotter than a limit you set.
No. They do different jobs. Thermal spots people, and regular cameras show who they are. Use both where you need to see faces.
With a service plan, our remote monitoring catches offline cameras, network drops and failed devices. Most issues get fixed without a site visit. Call 249-444-7793 to ask about plans.